BMW 4 SERIES BMW 435i xDrive F32 Coupe (304-306 Hp)

2013 and later

BMW F32 Downpipe Ø76 flange d-118 for Coupe 435i xDrive (304-306 Hp) 2013-

substitutes standard first catalyst, allows to essentially decrease resistances to the flow of exhaust gases for improvement of dynamic characteristics, increase of power and torque.

This detail is made for N55 engine (after 07/2013).

Diameter of detail - 76 mm. Totally compatible to original exhaust system.

Downpipe Brondex 76mm flange d-118mm for BMW 4 Series F32 Coupe 435i xDrive (304-306 Hp) 2013-   is entirely made of high-quality stainless steel by the means of the welding by TIG technique in argon medium.

• Diameter 76mm., wall thickness 2mm;

• Complete high-quality stainless steel (AISI 304);

• Turbine flange d-118mm;

• Double-sided welding of flanges and most loaded joints;

• Oxygen sensor ports by standard scheme;

• 100% OEM fit, easy to replace factory part;

• All the necessary fasteners are in set;

This product can be also used for (after 07/2013):

BMW 1 Series: F20 / F21 M135i (320 Hp) 2013-; F20 / F21 M135i xDrive (320 Hp) 2013-;

BMW 2 Series: F22 M235i (326 Hp) 2014-; F22 M235i xDrive (326 Hp) 2014-; F23 M235i (326 Hp) 2015-;

BMW 3 Series: F30 / F31 (Sedan-Touring) 335i (306 Hp) 2012-; F30 / F31 (Sedan-Touring) 335i xDrive (306 Hp) 2012-; F34 Gran Turismo 335i (306 Hp) 2013-; F34 Gran Turismo 335i xDrive (306 Hp) 2013-; F35 335Li (306 Hp) 2013-;

BMW 4 Series: F32 Coupè 435i (304 Hp/306 Hp) 2013-; F32 Coupè 435i xDrive (304 Hp/306 Hp) 2013-; F33 Cabrio 435i (306 Hp) 2014-; F36 Gran Coupè 435i (306 Hp) 2014-;

It is recommended to wrap-around the downpipe with thermo-insulating tape before the use. The imitator of oxygen sensor will be possibly needed.

351.00 €